tech@koxinenergy.com

1S 4A Battery Protection Board with I2C

Review the specifications for this 1S 4A Battery Protection Board with I2C. Contact Koxin to confirm the configuration, sample requirements and available technical documents.

· · ·

Inquire about this product

Product details

Model:   PCM-L02S04-996(1S)   IC:BQ27200
No. Test   item                                                                                                                                        (Test at normal temperature 25±2℃ and relative humidity≤90%) Criterion
1 Communication Interface   I2C 
2 Capacity Designing battery capacity                                                3200mAH
Designing battery capacity                                                                 3200mAH
Max capacity(Battery pack) 
Min capacity(Battery pack)   
External capacity Indication
Gas gauge algorithm  Impedance Track 
3 Voltage Charging voltage DC: 4.2V CC/CV(3.6V/1cell)
Balance voltage for single cell
4 Current Balance current for single cell
Normal operating-mode current:Gas Gauge in NORMAL mode,ILOAD > Sleep Current 160 uA
SLEEP operating-mode current:Gas Gauge in SLEEP mode,ILOAD < Sleep Current 80 uA
FULL SLEEP operating-mode current:Gas Gauge in FULL SLEEP mode,ILOAD < Sleep Current 25 uA
Maximal continuous charging current 4A
Maximal continuous discharging current 4A
5 Over charge Protection Over charge detection voltage 4.25V±0.05V
Over charge detection delay time 0.5S—2S
Over charge release voltage 4.10V±0.1V
6 Over discharge protection Over discharge detection voltage 2.5V±0.1V
Over discharge detection delay time 10mS—200mS
Over discharge release voltage 3.0±0.1V
7 Over current protection Over current detection current 10±2A
Detection delay time   5ms—60ms
Release condition Cut load
8 Short protection Detection condition Exterior short circuit
Detection delay time 200us-10ms
Release condition Cut load
9 Resistance Protection  circuitry ≤60mΩ
10 Temperature Operating Temperature Range -40~+85℃
Storage Temperature Range -40~+125℃

Send an inquiry

Product: 1S 4A Battery Protection Board with I2C