warren@koxinenergy.com WhatsApp

19.2V LiFePO4 Smart Battery Pack with RS485 and CAN Bus

Evaluate 19.2V LiFePO4 Smart Battery Pack with RS485 and CAN Bus against your device requirements. Use the specification below to shortlist the configuration, then confirm the drawing, load profile and sample approval criteria.

View specifications · Check compatibility

Discuss this configuration on WhatsApp

· · ·

Ask about this product on WhatsApp

Product details

Before selecting this battery

Evaluate 19.2V LiFePO4 Smart Battery Pack with RS485 and CAN Bus against your device requirements. Use the specification below to shortlist the configuration, then confirm the drawing, load profile and sample approval criteria.

Electrical compatibility
Compare the device input range and charger specification with the approved battery specification. Send continuous current and startup or transmit peaks with their duration.
Mechanical fit
Request a dimensioned finished-pack drawing. Allow space for protection electronics, leads, connector mating and installation tolerances.
Sample validation
Check runtime, startup behavior, charging and protection recovery in your device under the intended operating conditions.
Controller integration
Request the communication protocol and pinout. Confirm supported messages and charger or controller compatibility before sample approval.

Product specification details

Confirm specifications for your project

Capacity, energy rating and current limits require confirmation for this product. Contact Koxin for the current model-specific specification before selecting a charger, integrating the battery or placing an order.

Confirm specifications on WhatsApp

No.

Items

Parameter

1 

Product Model

19.2V LiFePO4 Smart Battery Pack with RS485 and CAN Bus

2 

Normal Voltage

19.2V

3 

Rated Capacity

Please contact Koxin to confirm for the selected configuration.

4 

Min Capacity

Please contact Koxin to confirm for the selected configuration.

5 

Energy

Please contact Koxin to confirm for the selected configuration.

6 

Internal Resistance

≤120mΩ

7 

Size

(159±1)mm*(8070±1)mm*(85±1)mm

8 

weight

1.9±0.3 Kg

9 

Shell material  

PVC

10 

Charge Voltage

21.9±0.15V

11 

Standard Cutoff Voltage

about 15V

12 

Charge Current

Please contact Koxin to confirm for the selected configuration.

13 

Charging cut-off current

0.02C

14 

Discharge Current

Please contact Koxin to confirm for the selected configuration.

Please contact Koxin to confirm for the selected configuration.

15 

Passive Protection Function

Over charge protection, Over discharge protection, Short Circuit Protection, Over Current Protection, Communication Function

16 

Positive

JST Connector 22AWG  100mm

17 

Negative

JST Connector 22AWG  100mm

18 

Charge Retention

After charging according to standard 3.2, placing the battery for 28 days under the standard test conditions, then discharge it under standard 3.3, and the charge retention rate is ≥80%.

19 

Cycle time

The cycle life is not less than 2000, the capacity retention rate is ≥80%. (Charging according to 3.2 standard, leaving 0.5~1h; discharging according to 3.3 standard, leaving 0.5~1h, counting 1 cycle time).

Questions before ordering

Will this battery fit my device?

Match the full operating-voltage range, charger, finished dimensions, connector polarity and load profile. Nominal voltage and capacity alone are not enough to approve a replacement.

Can I start with samples or a small production batch?

Samples and small-batch trials are supported. MOQ depends on capacity, model and design complexity. Samples are charged; a production-order credit or refund may be agreed by order value or quantity. Samples may be ready in as little as 7 working days, subject to complexity and material availability. Production generally takes 15–25 days. Confirm the order-specific schedule, testing and shipping separately.

Which documents should I request?

Request the exact configuration specification, mechanical drawing and wiring information. State the destination and required compliance documents. Available reports must match the ordered product; this page does not establish certification coverage.

Compare options and prepare your inquiry

These are other configurations to compare, not confirmed substitutes.

Battery pack RFQ checklist

Need a different configuration?

Share your application, required quantity and operating conditions. Include any dimensions, current limits, communication requirements or documents needed for evaluation.

Discuss a configuration on WhatsApp Technical document requests

Send an inquiry

Start a conversation on WhatsApp. Your message will include the product or page you are viewing.

Discuss your requirements on WhatsApp
Prefer email? Send a detailed inquiry

Product: 19.2V LiFePO4 Smart Battery Pack with RS485 and CAN Bus

Chat on WhatsApp