warren@koxinenergy.com WhatsApp

902730 3.7V LiPo Cell for GPS Trackers

Confirm rated capacity on the approved specification before ordering samples.

View specification details · Request the specification on WhatsApp

· · · ·

Ask about this product on WhatsApp

Product details

Before selecting this battery

Share the sleep current, transmission peaks and reporting interval. Request rated and minimum capacity with their test conditions before estimating tracker runtime.

Electrical compatibility
Compare the device input range and charger specification with the approved battery specification. Send continuous current and startup or transmit peaks with their duration.
Pouch-cell installation
Confirm finished-assembly thickness, width, height, lead exit and connector clearance. Request the approved allowance for thickness change before finalizing the enclosure.
Sample validation
Check runtime, startup behavior, charging and protection recovery in your device under the intended operating conditions.
Transmission load
Provide the modem supply range and measured transmit-current profile. Evaluate voltage at the device during a transmission, including low state of charge.

Product specification details

No.

Items

Parameter

1 

Product Model

Catalog reference 113

2 

Normal Voltage

3.7V

3 

Rated Capacity

Confirm the approved specification before ordering

4 

Min Capacity

Confirm with the approved specification

5 

Energy

Confirm with the approved specification

6 

Internal Resistance

≤75mΩ

7 

Max Size

9*27*30mm

8 

weight

//

9 

Shell material  

PVC

10 

Charge Voltage

4.2±0.15V

11 

Standard Cutoff Voltage

about 2.75V

12 

Charge Current

≤ 350mA

13 

Charging cut-off current

0.02C

14 

Discharge Current

Normal Current

≤ 2000mA

15 

Passive Protection Function

16 

Positive

17 

Negative

18 

Charge Retention

After charging according to standard 3.2, placing the battery for 28 days under the standard test conditions, then discharge it under standard 3.3, and the charge retention rate is ≥80%.

19 

Cycle time

The cycle life is not less than 500, the capacity retention rate is ≥80%. (Charging according to 3.2 standard, leaving 0.5~1h; discharging according to 3.3 standard, leaving 0.5~1h, counting 1 cycle time).

Questions before ordering

Will this battery fit my device?

Match the full operating-voltage range, charger, finished dimensions, connector polarity and load profile. Nominal voltage and capacity alone are not enough to approve a replacement.

Can I start with samples or a small production batch?

Samples and small-batch trials are supported. MOQ depends on capacity, model and design complexity. Samples are charged; a production-order credit or refund may be agreed by order value or quantity. Samples may be ready in as little as 7 working days, subject to complexity and material availability. Production generally takes 15–25 days. Confirm the order-specific schedule, testing and shipping separately.

Which documents should I request?

Request the exact configuration specification, mechanical drawing and wiring information. State the destination and required compliance documents. Available reports must match the ordered product; this page does not establish certification coverage.

Compare options and prepare your inquiry

These are other configurations to compare, not confirmed substitutes.

Battery pack RFQ checklist · GPS and IoT battery project requirements

Need a different configuration?

Share your application, required quantity and operating conditions. Include any dimensions, current limits, communication requirements or documents needed for evaluation.

Discuss a configuration on WhatsApp Technical document requests

Send an inquiry

Start a conversation on WhatsApp. Your message will include the product or page you are viewing.

Discuss your requirements on WhatsApp
Prefer email? Send a detailed inquiry

Product: 902730 3.7V LiPo Cell for GPS Trackers

Chat on WhatsApp